Lange Originals: The Lange Rack System

When you are looking for a rack system for your Jeep then you really do need to take a closer look at The Lange Rack that is made by Lange Originals.  This is a rack system that is not like the other systems that you will find on the market. 

This rack system has been designed to be able to be used with a soft top or with a hard top and no matter which way you use it, the rack will be great at holding your cargo!  The Lange Rack does not have any bars that run from front to back that will interfere with the top of your Jeep.  It features rear and front sections that are sturdy and self-supporting.  These sections are equipped with quick release latches that will allow you to remove or attach each of them in just a matter of seconds.  There is a quick release clamp that is meant to be attached to the existing bolts on the windshield in the front of your Jeep and another one for the spare tire at the back of your Jeep.  This is the ideal rack system for plywood, kayaks, canoes or anything else that is too large to put inside your Jeep.  The Lange Rack is made from durable steel that has been given a coating of black epoxy so that it will be resistant to corrosion.  It is capable of supporting up to 150 pounds.

Features at a Glance

·         The Lange Rack System that is made by Lange Originals comes to you complete with a limited warranty that is good for a full year

·         The Lange Rack System that is brought to you by the minds at Lange Originals is made with pride right here in the USA

·         The Lange Originals designed Lange Rack System is unlike any other rack system on the market today

·         The Lange Rack System that is made by Lange Originals is made to be used with either your Jeep soft top or the hard top

·         The Lange Rack System that is brought to you by the minds at Lange Originals has no bars that run from the back to the front

·         The Lange Originals designed Lange Rack System consists of a rear section and a front section that are each self-supporting

·         The Lange Rack System that is made by Lange Originals is made from steel

·         The Lange Rack System that is brought to you by the minds at Lange Originals has been given a coating of black epoxy so that it will have resistance to corrosion

·         The Lange Originals designed Lange Rack System is capable of holding up to 150 pounds of cargo

 

Hoist – A – Top Power Hardtop Removal System by Lange Originals for Freedom Tops

When it comes to removing and storing a Freedom top from a Jeep, the Power Hoist – A – Top is what you need to get the job done quickly and easily.  In fact, with this top, removing, storing and even replacing the Freedom top can be a one person job!  The construction of the hoist is burly and it includes a lifting device that is both powerful and chock full of safety features.  Your Freedom top will be supported by a steel frame that is well-balanced.  While other hoist products on the market are made using ropes and pulleys, the Lange Originals line of hoists feature a steel chain that has a high tensile strength.  When you purchase this Hoist – A – Top you will get everything that is necessary for a safe and proper installation and this includes complete and detailed instructions for both the installation of the hoist and the use of it.  The hooks that will come into contact with the Freedom top have been coated with rubber just as the hardware has been coated in foam.  This is so that the finish on your top will not be damaged.  Because this is a power operated hoist, once you attach it to the top of your Jeep, it does all of the work for you.  Lane has included 40 feet of the steel cable so that you will have more than enough to accomplish the removal and storage of your Jeep top.  There is also a winch, a remote control and a mounting bracket included. 

OK, so yes it does remove and replace the top but wasn’t there some mention about storing it?  Now, as of this moment what do you do with the hardtop of your Jeep when you remove it?  Do you lean it against the wall of your carport or garage?  Maybe you lay it flat on the floor or a workbench or balance it across a couple of saw horses?  While those are all viable options for storing the top when it is not in use, they all take up valuable real estate in your carport or garage.  Additionally, you run the risk of your top being dented, dinged or scratched in any of those locations. 

With this hoist, you will be able to sore the Freedom top at or near your ceiling in the carport or garage.  That’s right, when you use the hoist to remove the top, simply hoist it up to the ceiling and leave it there.  This clears up that floor space while there will be no chance of the top getting dented, dinged or scratched.

This hoist comes to you with a 1 year limited warranty and it has been made with pride right here in the USA.