Lange Originals: The Lange Rack System

When you are looking for a rack system for your Jeep then you really do need to take a closer look at The Lange Rack that is made by Lange Originals.  This is a rack system that is not like the other systems that you will find on the market. 

This rack system has been designed to be able to be used with a soft top or with a hard top and no matter which way you use it, the rack will be great at holding your cargo!  The Lange Rack does not have any bars that run from front to back that will interfere with the top of your Jeep.  It features rear and front sections that are sturdy and self-supporting.  These sections are equipped with quick release latches that will allow you to remove or attach each of them in just a matter of seconds.  There is a quick release clamp that is meant to be attached to the existing bolts on the windshield in the front of your Jeep and another one for the spare tire at the back of your Jeep.  This is the ideal rack system for plywood, kayaks, canoes or anything else that is too large to put inside your Jeep.  The Lange Rack is made from durable steel that has been given a coating of black epoxy so that it will be resistant to corrosion.  It is capable of supporting up to 150 pounds.

Features at a Glance

·         The Lange Rack System that is made by Lange Originals comes to you complete with a limited warranty that is good for a full year

·         The Lange Rack System that is brought to you by the minds at Lange Originals is made with pride right here in the USA

·         The Lange Originals designed Lange Rack System is unlike any other rack system on the market today

·         The Lange Rack System that is made by Lange Originals is made to be used with either your Jeep soft top or the hard top

·         The Lange Rack System that is brought to you by the minds at Lange Originals has no bars that run from the back to the front

·         The Lange Originals designed Lange Rack System consists of a rear section and a front section that are each self-supporting

·         The Lange Rack System that is made by Lange Originals is made from steel

·         The Lange Rack System that is brought to you by the minds at Lange Originals has been given a coating of black epoxy so that it will have resistance to corrosion

·         The Lange Originals designed Lange Rack System is capable of holding up to 150 pounds of cargo

 

Hoist – A – Top Power Hardtop Removal System by Lange Originals for Freedom Tops

When it comes to removing and storing a Freedom top from a Jeep, the Power Hoist – A – Top is what you need to get the job done quickly and easily.  In fact, with this top, removing, storing and even replacing the Freedom top can be a one person job!  The construction of the hoist is burly and it includes a lifting device that is both powerful and chock full of safety features.  Your Freedom top will be supported by a steel frame that is well-balanced.  While other hoist products on the market are made using ropes and pulleys, the Lange Originals line of hoists feature a steel chain that has a high tensile strength.  When you purchase this Hoist – A – Top you will get everything that is necessary for a safe and proper installation and this includes complete and detailed instructions for both the installation of the hoist and the use of it.  The hooks that will come into contact with the Freedom top have been coated with rubber just as the hardware has been coated in foam.  This is so that the finish on your top will not be damaged.  Because this is a power operated hoist, once you attach it to the top of your Jeep, it does all of the work for you.  Lane has included 40 feet of the steel cable so that you will have more than enough to accomplish the removal and storage of your Jeep top.  There is also a winch, a remote control and a mounting bracket included. 

OK, so yes it does remove and replace the top but wasn’t there some mention about storing it?  Now, as of this moment what do you do with the hardtop of your Jeep when you remove it?  Do you lean it against the wall of your carport or garage?  Maybe you lay it flat on the floor or a workbench or balance it across a couple of saw horses?  While those are all viable options for storing the top when it is not in use, they all take up valuable real estate in your carport or garage.  Additionally, you run the risk of your top being dented, dinged or scratched in any of those locations. 

With this hoist, you will be able to sore the Freedom top at or near your ceiling in the carport or garage.  That’s right, when you use the hoist to remove the top, simply hoist it up to the ceiling and leave it there.  This clears up that floor space while there will be no chance of the top getting dented, dinged or scratched.

This hoist comes to you with a 1 year limited warranty and it has been made with pride right here in the USA.

Lange Originals Manual Hoist – A – Top Power Hoist Upgrade

Why in the world would anyone who has a manually operated Hoist – A – Top made by Lange Originals want a power upgrade for it?  What, seriously?  The answer to that question should be glaringly obvious.  Here are your choices:

A.   Stand and manually crank the hoist until your top is positioned where you want it

B.   Push a button and watch it go

Which would you choose?

Now obviously this upgrade is only meant for those who have already purchased the Manual Hoist – A – Top that is made by Lange Originals.  Once you get this upgrade and install it, the removal and replacement (and even storage) of your Jeep top becomes a task that can be completed simply by you pushing a button.  No more need for you to stand there and crank away at the hoist.

With this power upgrade, you will turn your original hand powered hoist into one that will be powered solely by electricity.  This effectively turns the process into one which requires no effort from you at all.  The construction of tis upgrade is one that is burly.  The lifting device of the hoist itself is extremely powerful and it is also full of safety features.  With the power upgrade, you will get a remote control, complete detailed instructions on installation and use along with various options regarding mounting, a mounting bracket and a winch.

Please Note:

Must be used with your existing Hoist – A – Top that is manual.

Parts included:

·         4 washers

·         2 lag screws

·         4 mounting bolts

·         2 cable clamps

·         2 pulleys

·         Support bar

·         Power unit

·         Remote control

This particular upgrade will mean that the length of your cables will increase.  It is meant for use in garages or carports with a ceiling height that is up to 36 feet.  The warranty that comes with the upgrade is good for a year.

As far as installation goes, this is an upgrade that can be installed and ready to use in about 3 hours.  You will need a pencil, an adjustable wrench, a drill, a measuring tape and a Phillips screwdriver.

Features at a Glance

·         The Manual Hoist – A – Top Power Hoist Upgrade that is made by Lange Originals comes to you complete with a warranty that is good for a full year

·         The Manual Hoist – A – Top Power Hoist Upgrade that is brought to you by the minds at Lange Originals is made with pride right here in the USA

·         The Lange Originals designed Manual Hoist – A – Top Power Hoist Upgrade will take all of the work out of removing, storing and replacing your Jeep hardtop

·         The Manual Hoist – A – Top Power Hoist Upgrade that is made by Lange Originals will allow for you to remove, store and replace your Jeep hardtop with the simple push of a button

Hardtop Removal System by Lange Originals for Freedom Hardtops

Lange Originals is located in Salt Lake City, Utah and they are a family owned business.  This is a company that specializes in making and distributing all sorts of products for Jeeps and other vehicles.  They are Jeep enthusiasts themselves and have been trekking the Moab for over 3 decades.  This is all just to let you know that when it comes to Jeeps, they have the practical experience to know what Jeeps are capable of as well as what they need and they make an effort to provide Jeepers with those products.

One of the things that Jeepers struggle with is getting the hardtop off of and back onto their Jeeps.   For this reason, they have come up with what they call the Hoist – A – Top.  This is actually an entire line of products that make this task easier.

Manual Hoist – A – Top

This particular Hoist – A – Top is made for use with the Freedom tops.  It is something that is a necessity for anyone who owns a Jeep and wants to be able to remove or replace the Freedom top by themselves and with ease.  The construction of this hoist is quite rugged and the lifting device itself is extremely powerful and packed full of various safety features.  One of the awesome things about this particular hoist is that in order to use it you will not need to make any sort of modifications to your Jeep top. 

The hooks on this top have been coated with rubber and the hardware itself is coated with foam.  This is to ensure that the finish on your hardtop remains protected.  The design includes a steel cable that has a high tensile strength as opposed to hoists made by competitors who use ropes and pulleys.

The frame of this hoist is also incredibly strong.  It attaches quickly and with ease to the hardtop.  There is not a necessity for drilling, welding, cutting or any other sort of modifications to be made to the top of your Jeep.  The mechanism for pulling the cable is one that has been specially designed and it will lift your Freedom top off of the Jeep and then hoist it all the way to the ceiling and then I will store it there until you are ready to replace it back on the Jeep.  This is so easy to use that you can have the top off of your Jeep and be ready to hit the trials in under 3 minutes.  Better still is the fact that you will be able to get the top off and back on your Jeep all by yourself!

Lange Originals Quick Release I Mirror

There are a couple of different Quick Release Mirrors that are made by Lange Originals.  The Quick Release (or Quick Release I) is meant for use on the Wrangler YJ, TJ, Rubicon and Unlimited.  With this mirror, you will be able to take your Jeep’s doors off yet still be legal by having a mirror.  Mirrors are important – legally speaking – because they are not just regulated by the state that you are in, mirrors are part of federal safety regulations.  Aside from the legalities of having a mirror, when you are driving on the trails and really anywhere off road, you will need to be able to see everything around you…even more so than on the highway.  With this mirror, you can still be door-less on the trails without losing any of that precious range of vision.

With the Quick Release I mirror that is made by LangeOriginals, the whole mirror without a door issue is no longer an issue.  This mirror has a quick mount or quick release mechanism.  In truth, it locks with the use of a cam directly to the hinges for the door.  The mirror itself is called a Mirror – A – Mirror I and it is hand machined and then is finished by hand.  This mirror has been made from aluminum of an aircraft grade along with stainless steel.  This means that you get a mirror that has an incredible resistance to corrosion.  This mirror is stylishly made and will look great on any Jeep.

Features at a Glance

·         The Quick Release Mirror I that is made by Lange Originals comes to you complete with a limited warranty that is good for a full year

·         The Quick Release Mirror I that is brought to you by the minds at Lange Originals is made with pride right here in the USA

·         The Lange Originals designed Quick Release Mirror I has a resistance to corrosion unlike any other mirror on the market today

·         The Quick Release Mirror I that is made by Lange Originals is constructed from an aircraft grade aluminum and also from stainless steel

·         The Quick Release Mirror I that is brought to you by the minds at Lange Originals is first machined y hand and then is finished by hand

·         The Lange Originals designed Quick Release Mirror I cam locks right to the factory installed door hinges on your Jeep

·         The Quick Release Mirror I that is made by Lange Originals allows for you to still drive legally while not having doors on your Jeep

·         The Quick Release Mirror I that is brought to you by the minds at Lange Originals is meant for use on the Jeep TJ, YJ, Rubicon and Unlimited

Kwick Kit II Jeep Hardtop Removal Kit by Lange Originals

With the Kwick Kit II Removal Kit for Jeep hardtops there will not be a need for searching for missing bolts, worrying about loose screws and wasting time.  You will be able to remove the hardtop from your Jeep with a simple flip of your fingers.  The Kwick Kit II comes to you with a pair of quick release latches that work sort of like the top release in a convertible.  These latches are for use on the frame of your windshield.  This is how the front part of your hardtop will be released.  You will also get 8 fasteners that are patented.  These are 1 ¼ turn fasteners and they will come of wit only your fingers being necessary – no tools.  This is how the back of the hardtop is released.  As far as these fasteners go, they each have a not that will be attached permanently to the body of your Jeep so that you will not need to waste any time or energy looking for them.  The bolts twist into and out of these nuts simply by using your fingers.  For the initial installation though there will need to be some drilling.  You will also need a rivet pop tool for proper installation.

Other things that are included in the Kwick Kit II are 8 nut plates and 8 rivets measuring 3/16” as well as 16 rivets measuring ½”.  You will get complete and detailed instruction for a safe and proper installation as well as instructions on using it to remove and replace the hardtop of your Jeep. 

Please note:

·         The Kwick Kit II for the Jeep Wrangler YJ and CJ do require a bit more drilling.  In addition, the CJ will also require bolts of a longer size so when you purchase the Kwick Kit II please keep the model of your Jeep in mind.

·         Wrangler TJ kits will have 4 latches for the rear of the Jeep and there is not any necessity for drilling for these. 

·         The Kwick Kit II is not meant to be used on Jeeps that have bodies made from fiberglass

Features at a Glance

·         The Kwick Kit II Removal Kit for Jeep hardtops that is made by Lange Originals is made with pride right here in the USA

·         The Kwick Kit II Removal Kit for Jeep hardtops that is brought to you by the minds at Lange Originals will make removing the hardtop from your Jeep much easier

·         Once the Lange Originals designed Kwick Kit II Removal Kit for Jeep hardtops has been installed, there will not be a need for any sort of tools in order to remove or replace the hardtop of your Jeep

Lange Originals Kwick Kit Removal System for Your Hardtop

The Kwick Kit is a removal system for the hardtop of your Jeep and it is made by Lange Originals.  Included in this kit are a pair of quick release latches that are meant for use on the frame of the windshield.  There are also eight 1 ¼ turn fasteners included that are patented and will remove with ease.  You will permanently attach the nut part of these particular fasteners to the body of the Jeep so that you will not need to search for them when you want to use the Kwick Kit.  In order to reinstall the top of your Jeep, just twist the fasteners and they will hold the top in place.  The Kwick Kit comes with complete and detailed instructions for both installation and use.  Please note that for a safe and proper installation, there is a bit of drilling required.  You will also need a pop rivet tool in order to install the Kwick Kit properly.  The TJ version of this kit also includes 4 latches for attaching to the rear of the Jeep.  These do not require drilling.  Also, this kit is not compatible with Jeep bodies that are made from fiberglass.

Features at a Glance

·         The Kwick Kit Removal System for Your Hardtop that is made by Lange Originals comes with a warranty that is good for a year on all parts that are not rubber as well as a 90 day warranty on all of the rubber parts

·         The Kwick Kit Removal System for Your Hardtop that is brought to you by the minds at Lang Originals is easy to install using just common tools. 

·         With the Lange Originals designed Kwick Kit Removal System for Your Hardtop you will not need any tools in order to remove or replace the hardtop of your Jeep

·         The Kwick Kit Removal System for Your Hardtop that is made by Lange Originals features latches that will ensure that you will get a better, tighter seal

·         With the Kwick Kit Removal System for Your Hardtop that is brought to you by the minds at Lange Originals you will not need to worry anymore about loose screws, tracking down bolts and wasting your time

·         The Lange Originals designed Kwick Kit Removal System for Your Hardtop allows for the top of your Jeep to be removed by activating the fingertip release.  Simply flip the patented latches and then you will need to twist the knobs for a quick release of your Jeep top

·         With the Kwick Kit Removal System for Your Hardtop that is made by Lange Originals, you will be able to remove or replace the hard top of your Jeep in as little as 3 minutes

·         The Kwick Kit Removal System for Your Hardtop that is brought to you by the minds at Lange Originals does require some drilling and a pop rivet tool for installation

 

Lange Originals Jeep Wrangler Wall Mounted Door Hanger

All Jeepers know that there will be times when the doors just absolutely have to come off and you need to drive with that “in the air” feeling.  Having the doors removed from your Jeep gives you a feeling of freedom and it also allows for you to be able to have a larger range of visibility when you are out on the trails.  This does cause a problem though.  What do you do with your doors once you get them off of your Jeep?  You could always just lay them on the floor in your garage or carport but then that allows them to take up space while they are collecting dust, debris and dirt.  They are also in a position where they can get dented, dinged or scratched.  On the other hand, you might lean them up against the house out in the yard.  The only advantage this has over the option just discussed is that they won’t be on the floor in your garage and taking up space you need.

In reality, neither one of those options might be available to you.  However, there is a solution for this issue.  The solution is made by Lange Originals and it is called the Wall Mounted Door Hanger.  This product will allow you the option of hanging the doors of your Wrangler right up on the wall where they can remain protected from dents, dings and scratches while also not taking up that valuable floor space in your garage.  This door hanger is capable of holding your Wrangler’s full steel doors.  Just mount the hanger the one of your wall studs first.  All that you need to do then is hang the doors with their inner panels facing each other and the windows down.  If you are concerned about the mirrors, just leave them as they are or you can retract them. 

This wall mounted door hanger that is made by LangeOriginals is capable of holding any of the steel doors whether they are factory installed or aftermarket.  The hanger itself mounts easily to the studs in your garage or really on the studs in any wall in your abode. The wall mounted door hanger comes to you complete with everything that you will need in order to install it safely and properly.  Each wall mounted door hanger will hold a pair of Wrangler doors.

Features at a Glance

·         Warranty included.  Check packaging materials in order to know what is covered and for how long

·         Hanger will hold a pair of full steel doors

·         Keep your doors from being scratched, dented and dinged by getting them off of the floor

·         Perfect storage solution for full steel Wrangler doors

 

 

Lange Originals Paint Saver

The Paint Saver that is made by Lange Originals is a quite innovative product.  This will keep the paint on your Jeep looking great regardless of how many times you remove or replace the hard top.  Of course, as a Jeep owner you will be aware that when you remove or replace the hard top, it is difficult to do without scratching the rails.  The clear Paint Saver that is made by Lange Originals is totally transparent and it is the ideal solution for Jeeps that are new or for those that only have a few minor scratches.  The Paint Saver also comes in black for those Jeeps that have already been pretty scratched up.  Even the Paint Saver in black is opaque.  Each one of the Paint Saver kits comes with protection for the rails of your Jeep that is 30 mil thick and has been die cut for your specific rig.

Now, take into account the fact that the average zip lock bag has a thickness of 4 mil and you will see just how thick this Paint Saver is.  It will guard the paint on your rails from being scratched unnecessarily.  The adhesive is called Super Stick and this adhesive will not turn yellow over time.  Additionally, it will be able to withstand extreme temperatures both in the summer and in the winter.  The Paint Saver is easy to apply and because it is die cut for your specific Jeep, it will give you a perfect fit.  The Paint Saver is backed by a 1 year warranty.  

Features at a Glance

·         The Paint Saver that is made by Lange Originals comes to you complete with a warranty that is good for a full year

·         The Paint Saver that is brought to you by the minds at Lange Originals has been made with pride right here in the USA

·         The Lange Originals designed Paint Saver kit comes to you in your choice of black or clear.

·         The Paint Saver that is made by Lange Originals in clear is meant for use on Jeeps that are new or ones that only have minor existing scratches.  It is transparent

·         The Paint Saver that is brought to you by the minds at Lange Originals in black is still transparent and meant for Jeeps that have already been scratched up

·         The Lange Originals designed Paint Saver includes an adhesive known as Super Stick.  Tis adhesive will not turn yellow over time and is resistant to temperature extremes

·         The Paint Saver that is made by Lange Originals also comes with complete installation instructions

·         The Paint Saver that is brought to you by the minds at Lange Originals has been die cut to provide the ideal fit for your specific Jeep

 

Lange Originals 2004 – 2006 Wrangler Manual Hoist – A – Top Hardtop Removal System

This is the hoist for a hardtop of a Jeep to end all hoists.  This manual hardtop is so easy to use that with it, it is possible to remove your Jeep hardtop all by your lonesome!  The Manual Hoist – A – Top 2004 – 2006 Wrangler Hardtop Removal System has a construction that is rugged and it includes a safety featured device for lifting that is quite powerful.  Even better is that in order to use this system, you will not need to make any sort of modifications to the hardtop on your Wrangler.  The finish of your hardtop will also be protected because Lange Originals gave this hoist hooks that are coated in rubber and hardware that is covered in foam.  The steel cable that is used is one that has a high tensile strength.  The design of this hoist is in no way comparable to other hoists on the market that are made from pulleys and ropes.  This one outclasses and outperforms them all.

The Hoist – A – Top utilizes a steel frame that is incredibly strong.  This frame is what gets attached to the top of your Wrangler.  Also, there is no drilling or anything necessary to attach it to your hardtop.  Once the hoist is attached to the top a cable pulling mechanism that has been specially designed will lift the top up and off of your Wrangler all the way to the ceiling of your carport, garage or where ever you have it installed.  Then the hoist acts as a storage unit, holding your top at the ceiling until you are ready to use it again.  This means that your hardtop will not be scratched, dented or dinged while taking up valuable real estate in the floor of your carport or garage.

When you get ready to put the top back on your Jeep, simply reverse the process.  This hoist is a total turnkey system.  The installation of the hoist is quite simple and Lange made sure to provide each of these custom systems with everything necessary for a safe and proper installation including detailed instructions for both installation and use. 

Features at a Glance

·         1 year warranty

·         Made with pride in the USA

·         Allows you to remove the hardtop from your Jeep with ease

·         Attaches to the ceiling in your garage or carport

·         Requires no modifications to be made to the top of your Jeep

·         Hooks are coated with rubber

·         Hardware is coated with foam

·         Steel chain used has a high tensile strength

·         Rugged construction

·         Full of safety features

·         Protects the finish of your hardtop

·         Stores your hardtop off the floor and keeps it safe from being dented, dinged or scratched

Lange Originals Wall Mounted Door Hanger

Every Jeep owner knows that there are times when you just need to take the doors off and drive.  You need to be free and be able to feel the wind blowing through your hair and also being without doors allows for better visibility when you are out in the badlands.  Here is the conundrum though – what happens to the doors once you remove them from your Jeep?  You might lay them on the carport or on the floor of your garage but that means that they are taking up valuable real estate while they are also collecting debris, dust and dirt.  In addition to that, they might get scratched and you know that you don’t want that to happen!  What about sticking them out in the yard, leaning up against the house?  While that might also be an option, it does have the exact same disadvantages we just discussed.

You might not have either one of those options though.  Although, there is a solution that covers all of those possibilities.  The answer is the wall mounted door hanger that is made by Lange Originals.  These door hangers will allow for you to mount your Jeep doors right on the wall where they will not be in the way yet they will also be protected from scratches, dents and dings.  These hangers can hold the full steel doors and they are meant to be mounted to a stud in your walls.  Just hand the doors on the hanger with their inner panels together and make sure that you roll the windows down.  As far as the mirrors go, put them in their retracted position or even leave them as they are.

Lange Originals has made this wall mounted door hanger to be able to be compatible with any full steel doors be they aftermarket or OE.  The hangers mount with ease to the studs in the wall of your garage or any other wall that has studs.  They come to you complete with all of the necessary hardware for a safe and proper installation and even include instructions that are highly detailed.  These door hangers will hold a pair of doors.

Features at a Glance

·         All of the products made by Lange Originals come with a warranty.  These warranties are part specific so make sure that you check the packaging materials so that you know what the warranty covers and how long it is good for

·         With these wall mounted door hangers that are made by Lange Originals, you can take your doors off the floor of your garage or carport and hang them safely out of the way on the wall

·         These wall mounted door hangers will allows you to keep the doors protected from scratches, dings and dents while you are not using them on your Jeep